Hydraulic Surface Grinder
PDF version
Description: Hydraulic High Precision Surface Grinder
- The Longitudinal and Cross Slides have ultra-high precision class steel balls in guide ways for highly smooth operation of the table.
- An electronic control panel provides infinitely variable control of table speeds from 1.5 to 18 meters/minute and controls the automatic cross feed.
- The spindle is a spring-loaded, which runs on anti-friction oil bathed bearings.
- Movement of the wheel head up & down is affected by a Hand Wheel, which has a provision for Micro-Feed having graduations of up to 0.001mm
- Auto centralized lubrication under constant pressure with inbuilt drainage & reservoir
Specification: (in mm unless specified otherwise)
|
Dimension
|
TP-7
|
2412
|
112
|
3020
|
4020
|
4030
|
|---|---|---|---|---|---|---|
|
Working area
|
750x250
|
600x300
|
1000x300
|
750x500
|
1000x500
|
1000x750
|
|
Between table and wheel
|
275
|
300
|
300
|
600
|
600
|
600
|
|
Longitudinal traverse
|
800
|
650
|
1050
|
800
|
800
|
1050
|
|
Cross Traverse
|
285
|
335
|
335
|
570
|
570
|
820
|
|
Main Motor (Kw)
|
2.25
|
2.25
|
2.25
|
3.75
|
3.75
|
3.75
|
|
Approx. Weight (Kg)
|
2400
|
2200
|
3000
|
4000
|
4500
|
5500
|
Accuracy: Grade-I limits of Dr. G. Schlesinger’s Acceptance Test
- Grinding flatness accuracy of 0.01mm/ 1000mm in longitudinal and cross traverse
- Positional accuracy of 0.008mm (longitudinal) and 0.006mm (vertical & cross)
Application:
- Prevents oil film to rupture on the peaks of the micro irregularities on the work surfaces. This prevents a state of dry friction resulting in excessive wear of the rubbing surfaces.
- Surface finishing of Engine Blocks, Gears, Washers, Machine Frames, Valve Plates, Saw Blades, Blanks, Clutch, Piston Rings, Connecting Rods, Crankshafts, Fuel Injection, Components
Accessories:
Electromagnetic Chuck, Permanent Chuck, Dust Exhaust Equipment, Magnetic Coolant Clarifier, Vertical Cup Grinding Attachment, Coolant Equipment with Magnetic Separator, Demagnetizer, Swivel Vice, Universal 3-way vice, Radius & Angular Wheel Forming Attachment, Wheel Balancing Stand with Mandrel, Built-in Wheel Dressing Attachment mounted on spindle
| << Previous | Next >> |
Post new comment